Corrugated Sidewall Conveyor Belt

Usage & Structure

• Features include: 1. It may significantly reduce the conveyor area while saving space. 2. To prevent excessive wear and tear, there is no need to use the sidewall when in use. Type of Product: t T- or L-type horizontal cleats are both possible. c Use of the product: It may transport bulk materials with a large inclination angle, up to a maximum of 750, including powder or blocks.
• Corrugated sidewall conveyor belt needs to have a certain tensile strength and wear resistance. The longitudinal direction of the corrugated sidewall conveyor belt with empty edges must have great flexibility, and the transverse direction must have a specific amount of rigidity in order to meet the requirements of angle changes. The base belt's design is as follows: The top cover, bottom cover, carcass, and transverse stiff layer make up the base belt. The top cover often has a thickness of 3-6mm, while the bottom cover typically has a thickness of 1.5-4.5mm. Tensile force is supported by the carcass. Steel cord (ST), nylon (NN), polyester (EP), canvas, or cotton (CC) can be used as the material. The reinforced rigid layer is a unique reinforcement layer that is applied to the belt carcass in order to strengthen the transverse stiffness of the basic belt. The foundation belt's breadth is equivalent to that of a regular belt and complies with national regulations. Corrugated sidewall: To improve the tear and flexibility resistance, prevent tear from tugging and compression, and lengthen the life Of the sidewall, a tear-resistant canvas layer is within the corrugated sidewall. Light (N), medium (S), and heavy (ES) sidewalls belong to the S type, according to capacity. Cleat: Constructed of a fiber composite material, which increases impact resistance and prevents deformation from force. The cleat can be turned into a mosaic type, like the TS and TCS, enabling simple repair in cases of extreme wear and tear. The choice is T type or TS type when the conveyor's inclination angle is less than 400. If the inclination angle is greater than 400, choose type C, TC, or TCS. TO avoid material leaking from the space between them and creating a dead angle when unloading, the pitch Of the cleat should be thought Of to match the crest Of the sidewall. Secondary Iow- temperature thermal vulcanization is used to join the sidewall, cleat, and base belts as well as the corrugated sidewall belt that our company manufactures. The bonding is strong, stable, smooth, and difficult to break. Bolts that join the cleat and sidewall together boost overall rigidity, enhance performance, and address the issue of material leak.